• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

Eddie.. Why?!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Eddie.. Why?!

    It makes me sad.. literally.

    I want my expedation to be looking good when I start going to my first job come next week!

    ..Might help with the ladies! You heard?

    Here are two pictures of the current condition it's in.. I think the two photos should be enough.





    I'm going to go all out tommorow..

    Getting up early and doing a complete wash with NXT Car Wash using my SheepSkin Wash Mitt.

    When I am done I'll dry using microfiber cloths from CostCo.

    Then I'll follow through with Meg's 3 Step (DC #1 / DC #2 / DC #3).

    Finally I'll apply a layer of NXT Tech Wax using the applicator and remove with microfiber.

    Upon sitting over night I will run over eddie with the microfiber once more and another layer of NXT Tech Wax.

    Following the next day before I go to orentiation for work I'll apply NXT Tech Protectant as well as the booster spray.

    Sound Good?

  • #2
    I am not all up to date on the meg's product #'s.
    It sound good what you are doing.
    clean, polish, protect

    I would hold off at least 24hrs before adding a 2nd coat of nxt
    Products are only a good as the detailer using them.

    Comment


    • #3
      Then I'll follow through with Meg's 3 Step (DC #1 / DC #2 / DC #3).

      Finally I'll apply a layer of NXT Tech Wax using the applicator and remove with microfiber.

      Upon sitting over night I will run over eddie with the microfiber once more and another layer of NXT Tech Wax.

      Following the next day before I go to orentiation for work I'll apply NXT Tech Protectant as well as the booster spray.

      Sound Good?
      It sounds like a little more extra work on things that wont necesisarily produce the results you are looking for.

      I would say by looking at your list to just do the DC 3 step and then if you really want to apply a coat of nxt the next morning. Then enjoy your truck and all the work you put into it for a week and then if you still feel like waxing apply another coat of nxt. Obviously still use the protectant to finish of the job.

      What kind of job are you starting ?
      If you dont play you CANT win!

      Comment


      • #4
        It's McDonadls.. Closing Shift.

        Oh well.. 3PM to 11PM isnt that bad. I go to sleep then wake up whenever I want and no matter how late I've stayed up before I've never gotten up past noon so it's all good.

        Comment

        Your Privacy Choices
        Working...
        X