I am in the process of detailing my wife's Jeep. I chose to top #7 with two coats of #26. I see that a lot of poeple top #7 with NXT Tech Wax. Since Tech Wax has "some" cleaning ability, wouldn't that somewhat remove some of the #7? I think #26 or a Sealant would be a better choose. What do you all think?
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
What to top #7 with?
Collapse
X
-
Re: What to top #7 with?
I top #7 off with two coats of #26. I let each coat of #26 sit for 30 minutes before I wipe it off./Keith
2001 LT Tahoe | Hybrid Wheels - Depo Headlights with DDM HID's (55w @ 4.5k) - Clear Corners - Sonar LED Tail Lights (Red Smoked)
www.LakeMeadOnline.com
Comment
-
Re: What to top #7 with?
Thanks for the replies. I finished her Jeep this morning. After applying #80 followed by #7, I applied a thin coast of #26, let it dry overnight (about 15hours) then applied another coat on top and alowed it to haze over for about 25mins. Then I buffed it off with a Microfiber bonnet. I think it came out really good. It has a nice wet look to it. I think I choose the right combo. Unfortunitly, the Jeeps paint was somewhat neglected before we bought it so there are some clear coat issues that can't be corrected. I was going to take a few pictures but never got around to it. Thanks again for the replies.
Comment
Comment