Tweet
What happens when particles come off of the pad, is this just dried wax residue or what. I have been storing my pads in water to keep them clean.
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
-
Hey,
Whoa on storing the pads in water!! Meguiar's recommends that you do not even wash your pads! (I am assuming you are referring to buffing pads). Storing them in water may loosen the adhesive holding the velcro to the pad. As result, the velcro may let go and you could damage the paint if the backing plate comes into contact with it.
As for the foam pad dust, little bits sometimes fly off. But if chunks start to go, the pad must be replaced.
Tim -
Re: Pad Particles
I would be worried about mold attacking the pad if it's stored in water....Meguiar's pads need to be able to breathe when stored.Originally posted by 04KevinJ
What happens when particles come off of the pad, is this just dried wax residue or what. I have been storing my pads in water to keep them clean.r. b.Comment
Comment