Tweet
I just got my pc and now can't wait to use it. I am confused about applying and removing dc#2.Can I use a pc, if so do I use a foam pad or bonnet. Thanx.
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
-
Hi bchivers,
You can use the Deep Crystal Polish with either the W-8006 foam polishing pad, or the W-9006 foam finishing pad. I would recommend using the W-8006 pad and follow that by applying your wax with a W-9006 finishing pad.
If you have bonnets, as in microfiber polishing bonnets that go over a foam pad on the PC, they use these to remove the wax. If you have plenty, then use them to remove the polish also, otherwise, remove the polish by hand and safe your bonnets for removing the wax.
Important Note: You need to use a dry foam pad with the bonnets. If you put your clean, dry bonnet over a wet foam pad, the bonnet will absorb the excess product out of the foam pad and render the bonnet useless till you wash and dry it.
Good luck, and post some pics when you're done!
Mike -
Thanks Mike, unfortunately I have no way to get pics at this time but I will let you know when I finish.Comment
Comment