Tweet
This might not be the right forum to ask this, but i was wondering how to remove my seats so i can detail them real well. I drive an audi a4.
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
'00 Audi A4 1.8 T
'09 Audi A4 2.0 T Quattro
Attention to detail is the key to success
Steve -
I don't really think we can help you on how to remove seats from an Audi. Maybe an Audi forum would be more suitable. Or unless someone here has an Audi or has done it before. -
audi forum
or try getting your hands on a service manualBLINK Detailing
Serving the GTA AreaComment
-
I removed the seats from my Jeep GC w/ no prior experience w/ seat removal. It was very easy. I had 4 bolts holding the frame to the floor. Removed those and the seats came right out. If you have power seats you will have to disconnect the power cables (usually just a simple snap connector).1999 Ford Contour SVT
Silver Frost/Midnite Blue
1966/2760Comment
-
It should be easy. You should have a cable connection for the power seats, and 1 bolt on each side of the seat, so 4 in total. Just slide the seat all the way up, and take off the back 2 bolts, then all the way back, take off the 2 front ones, and yank the seat out. It might be kind of a hassle if the seatbelt is attached to the seat itself, in which case, check out an audi forum.Comment
Comment