New orbital user, bonnet questions

[PendragonZ]

OK, so i'm considering purchasing a PC for working on my car.
Right now I do everything by hand, and the products I use are ColorX and NXT tech wax, NXT spray wax.

Now, what kind of bonnets should I use for what types of products? I know that is a very broad question, but can anyone help this PC newbie out?

Thanks!

[tommy81569]

Hi,

I recently purchased a PC 7424 and 3 each of the 8006 and 9006 pads, using the 8006 pads with cleaners and polishes and the 9006 pads for polish and wax. I purchased a few of the bonnets for removing the wax and for a finishing buff after the wax had been removed, but have seen better luck with removing the wax by hand then buffing over the car with an ultimate bonnet.

After the car is washed and clay barred, if needed, I used the following:

8006 pad with Deep Crystal Paint Cleaner
8006 pad with Deep Crystal Paint Polish
9006 pad with NXT Tech Wax

I made the mistake of using Deep Crystal, but have since been corrected to look into MPPP, #82, and #83 in the professional line. The Deep Crystal products were designed for use by hand.

This is just my experience with the products so far, as I am still new to this also.

I hope this helps you.

Good Luck.