Tweet
I have an Integra with clear plastic head light lens with a few scratches. Can I wet sand to remove these or try a DA buffer with Plastic Polish? Any ideas would be appreciated. I do have a rotary and a DA available. Thanks for the help.
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
-
Try using Plastx with a Polishing pad and DA. You will find that the plastx will clean and polish up your lenses. A little bit of product goes a long way. Remove the product with a micro fiber towel.
Shane Lariba
Meguiar's Inc.Shane Lariba
Surface Car Specialist
1-800-854-8073 ext 138
Meguiar's Inc. -
I have not polished my lenses as yet but do need to. Here are a few products out of the Pro line to look at in addition to the Plastix:
#10 Clear Plastic Polish
Mirror Glaze Clear Plastic Polish
#17 Clear Plastic Cleaner
Mirror Glaze Clear Plastic Cleaner
#18 Clear Plastic Detailer
Mirror Glaze Clear Plastic Detailer
Also, if you try the Plastix or the Pro Line stuff and it still is not to your liking. You can look at the following for some ideas from others.:
When PlastX Is Not Enough
How To: Polish Fogged Over HeadlightsJeff Smith
Don't mistake my enthusiasm for experience.Comment
Comment