Can DeepCrystal Cleaner/Glaze-Polish be put on by hand?

[rclab1]

Hello all, just wanted to know, Is it safe to Put Deep Crystal Step 1 (cleaner) and Step 2 (glaze/polish) by hand?

I do not have a G100 PC.
I only have a SEARS buffer ($29.99)

after DC1 and DC2, Plan on putting NXT Paste Wax.

my paint is in good shape, minor swirls/holograms are visible after detail shop service at car dealer.

[Shane Lariba]

You can use the Deep Crystal Cleaner, Polish, and NXT Tech Wax by hand. If you have any further questions or concerns please fill free to give me a call. Thank you.

Shane

[sneek]

ya gotta hate dealer prep!!1

[Murr1525]

Just keep in mind DC#1 is very mild, and wont be strong enough to remove most, if any swirls.

[Shane Lariba]

I would have to disagree with the last statement. All paints are different, and every surface is different. Yes, the DC#1 is a mild paint cleaner, but it is a very effective product when it comes to mild cases of swirl marks. Make sure when you are applying the product that you use a foam applicator pad, working in small sections, and putting a few pounds of pressure when working the product in. Don't let the product dry, remove it with a microfiber towel. A little bit of product goes a long way. If after the first application of DC#1, you still have some swirls, go ahead and repeat the process. If after a couple of times of trying the product and there are still swirl marks, then at that time move on to a more aggressive cleaner. When using products you always want to start off with the least aggressive and work your way up if you need to. If you have any questions please fill free to give me a call. Thank you.

Shane

[sneek]

hmm interesting i have never had any luck with using DC1 as a swirl remover but hey you work for megs