Tweet
How hard is Speed Glaze to use? And if applied by a PC what setting is it applied on.
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
-
Check this post out... read down aways and #80 is talked about: Using the G-100 to remove swirls with the Professional Line
I use #80 and wouldn't be with out it, very easy to use with a PC and best of all it works! Says to use it on speed 4.5-5.Brandon
2007 Black Chevy Avalanche
My Albums: Avalanche
Meguiars Online Acronyms - Meguiars Product List.... -
Originally posted by gb387
Check this post out... read down aways and #80 is talked about: Using the G-100 to remove swirls with the Professional Line
I use #80 and wouldn't be with out it, very easy to use with a PC and best of all it works! Says to use it on speed 4.5-5.
I have used gallons of #80 and just love the stuff. I use it both with the rotary or the PC. When using the PC, I prefer to run it at speed 5 with the #80.
TimComment
-
I agree #80 has been the "Go To" product for me. I've polished about 15 cars now, and only once did I have to use #83 first. I use it on setting 5 for this application. I've never used it by hand, so I'll let some others chime in here.Originally posted by gb387
Check this post out... read down aways and #80 is talked about: Using the G-100 to remove swirls with the Professional Line
I use #80 and wouldn't be with out it, very easy to use with a PC and best of all it works! Says to use it on speed 4.5-5.
Magic,Never argue with an Idiot.. They'll only drag you down to their level, then beat you with experience..Comment
-
Thank you!
Comment
Comment