Tweet
New Paint Job
I own a Miata and just had a complete new paint job done on it. How soon can I give it the three step wax process?
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
-
Assuming it was baked: Minimum- one month. Optimal- up to three months. I always wait at least three myself just to make sure it finishes outgassing and thus attains maximum potential hardness.
In the meantime, you can use the second step of the three-step system. Deep Crystal Step #2 is a great product for fresh paint and will provide some looks and (minimal) protection. You will have to reapply after every wash though. Othe choices include #5/#3/#81/#7 (in order of my preference) or #80 if it needs correction.Practical Perfectionist -
what if the car isnt baked? i plan on repainting the rear of my car where the ccf is startin.my friend is gonna do it but all he has is a paint boothComment
-
You'll want to wait 3 months if you are going to be doing it yourself.
As was mentioned, you can use #80 to polish and add some protection in the meantime.2017 Subaru WRX Premium - WR BlueComment
-
Yeah, all the baking really seems to do is slightly lessen the outgassing time. It's just like the difference between a car painted in the NE during winter and a car painted in the SW during summer. The paint in the hot climate will cure faster.
Watch it with the #80 if the paint is very fresh, the initial cut might be a little more than you'd expect while the paint is fresh-from-the-gun soft. A few weeks can make a noticeable difference.Practical PerfectionistComment
Comment