I have water spots on the side windows of my Z71 and my SS and they been there for a while. Some of my friends are having the same problems. These water spots have been near impossible to remove I have tried several types of glass cleaners, alcohol, vinager, DC1 paint cleaner,#9, and even scratchX. With not very good results. ScratchX has performed these best, I took a couple of sections on the drivers side window working it in real well 4 to 5 different times on each section but it made the water spots less visbile but they are still there. Is it possible that they actually ecthed into the glass like they do on paint , I can rub my finger across them and the suface feels really smooth. If they are not ecthed in, is there someother problem that could be used that someone has had good results with?
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
Window Water spots
Collapse
X
-
have you tried claying your windows?
i think mike did a write up about using #4 on the windows too i cant find it tho
EDIT FOUND IT !Glass Polishing...Deep Cleaning
hope this helpsPatrick Yu
2003 Honda Accord
2008 Honda Accord EX-L V6
-
It is hard to etch glass, though not impossible.
I have had the best luck with simply claying the windows. But for more stubborn things, the link that sneek showed should be good. #4 by hand with a terry cloth, worked in extremely well.2017 Subaru WRX Premium - WR Blue
Comment
Comment