Good Practice?

[96greenmustang]

So I was bored and looking through MOF as always and decided, why not test some of the products I've bought out on my old spoiler off my wrecked Mustang. I grabbed all my bottles and spoiler and headed back to the computer. I started by applying #9, remeber I just want to get a feel for how these work, I then applied #2, followed by Step 1. I then decided why not learn how to clay so I busted open the clay and went to work. I then shot a final spray of QD on it and man o man I love Meguiars . I only did one section to compare it, the section I didn't do feels like sandpaper, the section with Meguiars feels like butter. Im so happy I invested money in all these great Meguiar products.
I'm also wondering if anyone could help me with the correct order to apply these as I'm teaching my friend in about 15 minutes.

#7
#2
Step 1
Clay
Quick detailer.

Thats all the products I have for now as the rest are under the tree

[gb387]

Its great you have something to test the products on, gives you a good feel if you have never used them.

You have #7 down in the list but you talk about #9?
Step 1 = Deep Crystal Paint Cleaner?

[96greenmustang]

Swirl Remover
DC-1
Fine Cut Rubbing Compound
Quick Detailer clay

Order?
Dc-1 Swirl Remover
Fine cut compound
Clay
QD
Help me if thats not right

[Mike Phillips]

Here's a suggested order,

Wash
Clay using Quick Detailer
Deep Crystal Step 1
#7
Wax
Maintain with Quik Detailer in-between regular washing


Read the back label of the #2 Fine Cut Cleaner and where it says

Method of Application

See if it says for use with Rotary Buffer only, or if it says it can be applied by hand. We reformulated M02 and the old formula should only be applied using a rotary buffer.