• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

House Paint Splash Removal

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • House Paint Splash Removal

    Hi all,

    First post (and one I wish I wasn't making).

    I need some help finding a way to remove house paint from a vehicle. So far I've visited two detail shops in my area and a body shop and they all seem to agree that the only way to remove the paint is to strip or replace the "damaged" parts. I'd like to do that only as the last option.

    The paint is Porter brand Glyptex alkyd based house paint, white in color. The list of things that have been tried (at least on a superficial level) is:

    Clay
    Mineral Spirits
    Turpentine
    Lacquer Thinner
    Acrysol
    and maybe a couple more chemicals that I'm not aware of or familiar with.

    This paint is sticking like epoxy. The worst part is it's been 5 months of going round with detailers, the paint contractor that was responsible for the spill, and my insurance company. So the paint's now been on the truck for 5 months.

    I have a couple of checks from the insurance company. Probably enough to fix the visible damage, but there's paint all over the underneath as well (frame, suspension) as well as on the tires and wheels, which the current payments will not cover.

    If I can find something that will knock this stuff off without replacing parts it would be ideal.

    The Porter paint rep says he recommends Glyptex thinner for removal of the paint from things like granite countertops and baseboards, but he's not comfortable recommending it on a car finish. He's just not sure if it will damage it or not.

    The vehicle is a 2002 Ford Excursion Limited, white with gold side cladding. The spill was a full 5 gallon bucket, which I ran through with my right side when it was fresh. The paint coated the insides of both right-hand fender wells, splashed on the running board, all four pieces of side cladding, the front bumper, the exhaust, and under the chassis. It also coated the tire treads and sidewalls about 1/2 inch in and when I stopped, it ran down the sidewalls and partially over both rims.

    Obviously, this is a mess.

    Help!!

    Chris

  • #2
    Re: House Paint Splash Removal

    Originally posted by chrison600

    The vehicle is a 2002 Ford Excursion Limited, white with gold side cladding. The spill was a full 5 gallon bucket, which I ran through with my right side when it was fresh.

    The paint coated the insides of both right-hand fender wells, splashed on the running board, all four pieces of side cladding, the front bumper, the exhaust, and under the chassis.

    It also coated the tire treads and sidewalls about 1/2 inch in and when I stopped, it ran down the sidewalls and partially over both rims.

    Obviously, this is a mess.

    Help!!

    Chris

    Hi Chris,

    Welcome to Meguiar's Online!

    I'm sorry to hear of your mishap, it sounds like a sticky situation for sure.

    At this point, since so much time has gone by and the paint has undoubtedly dried and hardened, it sounds like your only option is to try the thinner designed by the paint manufacture to dissolve and remove it.

    The person doing this should be the person who caused the damage. If the thinner harms the surfaces of your Ford that are affected, then at least you tried the thinner removal route and since it didn't work, the responsible party should be responsible to provide the necessary solution and any related costs.
    Mike Phillips
    760-515-0444
    showcargarage@gmail.com

    "Find something you like and use it often"

    Comment


    • #3
      Re: Re: House Paint Splash Removal

      Originally posted by Mike Phillips The person doing this should be the person who caused the damage. If the thinner harms the surfaces of your Ford that are affected, then at least you tried the thinner removal route and since it didn't work, the responsible party should be responsible to provide the necessary solution and any related costs.
      I agree, however the paint contractor has made it clear that going through the hurdles to prove that he was responsible will be more painful that going through insurance.

      I suppose I will try the Porter thinner.

      Thanks for your help!

      Chris

      Comment


      • #4
        I understand.

        Best of luck...
        Mike Phillips
        760-515-0444
        showcargarage@gmail.com

        "Find something you like and use it often"

        Comment


        • #5
          Hi:

          Take a look at Goo Gone.

          Regards,

          KTruck
          Make it Shine

          Comment


          • #6
            I sure would not have accepted a check from the insurance company. They should pay the firm directly for a prompt and quality repair.

            If it were me, I would go to my own insurer and have them fix the car properly and subrogate the charges to the other insurance company responsible.

            You've been screwing around with this for months, driving a car that is a mess for no reason beside that their insurer wants to make this difficult for you and hopes you will go away in disgust and frustration.

            Call your agent and ask him to take care of this.
            Jim
            My Gallery

            Comment

            Your Privacy Choices
            Working...
            X