Hey Guys,
I have a question about polishing my car and I'd really appreciate some help from someone who knows more than I do.
So, the situation is this. I've just bought a 2007 metallic black Toyota Yaris, and usual story, someone in the past has got over enthusiastic with the rotary polisher and has induced holograms into the clear coat. They look very similar to these in the close up picture of the Merc's bonnet. http://www.meguiarsonline.com/forums...Swirls-By-Hand
I've just bought the Meguiar's Paint Restoration kit (which comes with the Ultimate Compound) and a separate bottle of Ultimate Polish for the final finishing prior to waxing.
My question is this. I'm concerned that the UC is going to be too aggressive on the paintwork, whilst the UP is not going to be aggressive enough (as it's for final polishing) Have I made a mistake by buying this combination of products and instead maybe should have gone with Swirl-X instead?
Can someone advise if I should go ahead and do a test with the UC and UP products and see how it comes out. Or instead, buy the Swirl-X and use that and then the UP to finish, forgetting about the UC entirely.
Thanks! Ben.
I have a question about polishing my car and I'd really appreciate some help from someone who knows more than I do.
So, the situation is this. I've just bought a 2007 metallic black Toyota Yaris, and usual story, someone in the past has got over enthusiastic with the rotary polisher and has induced holograms into the clear coat. They look very similar to these in the close up picture of the Merc's bonnet. http://www.meguiarsonline.com/forums...Swirls-By-Hand
I've just bought the Meguiar's Paint Restoration kit (which comes with the Ultimate Compound) and a separate bottle of Ultimate Polish for the final finishing prior to waxing.
My question is this. I'm concerned that the UC is going to be too aggressive on the paintwork, whilst the UP is not going to be aggressive enough (as it's for final polishing) Have I made a mistake by buying this combination of products and instead maybe should have gone with Swirl-X instead?
Can someone advise if I should go ahead and do a test with the UC and UP products and see how it comes out. Or instead, buy the Swirl-X and use that and then the UP to finish, forgetting about the UC entirely.
Thanks! Ben.
Comment