- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
7 results in 0.0030 seconds.
-
First Time G110 User
Hey All, So I used my new G110 for the first time last weekend. I have wasted too many years waxing by hand! This thing is great! After washing and clay barring my Mustang I busted out some #80 and went to town. Man, WAY better results than last year when I hand applied some nasty Turtle Wax p... -
Heavy Straight line scratching
OK, So i've let my truck go further than i'd like to tell. Between going out on skinny roads with lots of brush and no time to get a proper detail in, it's come down to this. After 2 passes with 83, then 1 pass of 80 to remove the haze left from 83, it gets 95% out. (The swirls are not problem... -
Heavy Stains In Paint.
Just as the title reads, there is real heavy stains in the paint. I can wash it and dry it and there still there. The other day I buffed it with the Meguiars Dual Action Cleaner/Polish, Grit 6 and it hardly at all did anything. It looks like some bad waterspots. Its only really on the hood, roof,... -
A scratch with depth
Is any scratch on paint that you can feel has depth to it, to far gone for simple correction using a DA polisher? I have two scratches on the bottom of my passenger door that are about an inch long (each) and run vertically. If you pass your finger nail over them, your nail falls into the scratch... -
1966 Buick Skylark GranSport with the Original Single Stage Lacquer Paint
1966 Buick Skylark GranSport with the Original Single Stage Lacquer Paint I am working on a 66 Buick Skylark Gransport that has White original single stage acrylic lacquer paint. Last weekend we pulled it out of the barn and I washed and clayed it. The paint feels a little rough and dry and appea... -
Detailing Horse trailer
hi all, My horse trailer needs a facelift. This trailer is made out of aluminum with single stage metallic paint. (learned about single stage paint here) From the picts you may be able to tell it as a lot of oxidation. In order to get my trailer looking the best i can where do i start and which... -
Can You Use the PC to Polish-out #2000 Grit Sanding Marks?
Can You Use the PC to Polish-out #2000 Grit Sanding Marks?
Fixing a chip and sanded down the touch up paint with 2000 grit. Was thinking of using new ScratchX on a DA to polish it out. Would ScratchX do the job on a 2000 sand job, or should I use something else?
