My rims look like ****. I might paint them black. any ideas on how to do it? Im gonna try to sand them a little bit to get an even surface and then paint them black....
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
paint rims?
Collapse
X
-
Re: paint rims?
what i did was take a wire brush attach o n a grinder. take off the paint. sand it with 80 -100 grit sand paper in teh cracks. hit it with primer. then paint them. hope this helps broClick For My Main Youtube Channel
Click For My Meguiars Review Channel
^^Meguiar's Review Specialist^^
Comment
-
Re: paint rims?
i told you how to do it?Click For My Main Youtube Channel
Click For My Meguiars Review Channel
^^Meguiar's Review Specialist^^
Comment
-
Re: paint rims?
Originally posted by Flash Gordon View Post
Comment
-
Re: paint rims?
Originally posted by Flash Gordon View Post
If you need to paint them, there is a lot of prep work that needs to be done. You will need to remove old paint or sand down to at least 320 or 400 grit (perhaps get shot blasted), use spot filler putty to fill road rashes, sand again, prime with an appropriate primer (one that can handle high heat ie. brake cycles), and then wheel paint. You can do all of this (except shot blasting) at home! If you do not sand well enough or use the correct products, you will have only OK results. Do it once and do it right the first time!
Tim
Comment
-
Re: paint rims?
Google is your friend
Just google "diy wheel refinishing"
That will get you tonnes of info"STRIFE" aka Phil
2005 Infiniti G35 Coupe (IP/ aka White) the Toy
2011 Subaru Impreza (SWP/ aka White) the DD
2017 Subaru Forester (CWP/ aka White) Wifey's
Comment
Comment