Need custom car parts, where do I get...?

[Deaner5]

Re: Need custom car parts, where do I get...?

So I went to a local shop and talked to their guys about tinting... Tinting all the windows is $220 with life time warranty, but my car won't pass inspection because NJ laws doesn't allow tinting fronts... I don't think I'll tint anything, because just tinting the back three looks weird.

When you say tinting fronts, do you mean tinit the front passenger windows or the actual windsheild? I thought MN was bad only allowing 50% tint, but no front passengers would be really bad.

I agree with most car-specific forums being just people bashing others because if you don't do a, b and c to you specific model and instead do x, y and z, you for some reason are a "disgrace" or other four letter words.

Another vendor that might help is www.pfyc.com, they do some GM stuff (and a CTS store) and have pretty good customer service. I think their prices are ok, but could be better. Certainly something to look into.

[Maserati Mario]

Re: Need custom car parts, where do I get...?

No Black Magic Chocolates that I know of.
The one benefit of doing it yourself is you can rip it off to pass inspection/fix it tickets, and then just put it back on yourself.
The side windows are easy to do.

[agp423]

Re: Need custom car parts, where do I get...?

So I went to a local shop and talked to their guys about tinting... Tinting all the windows is $220 with life time warranty, but my car won't pass inspection because NJ laws doesn't allow tinting fronts... I don't think I'll tint anything, because just tinting the back three looks weird.

[Eddie6th]

Re: Need custom car parts, where do I get...?

[QUOTE=Maserati Mario;324760]Tinting windows is a pain!

The last tint I bought was Black Magic from wally world, like $12 bucks.
Worked fine,


You can also get a box of Black Magic Chocolates for $12 bucks!

Do you get Black Magic chocolates in the states?

[roushstage2]

Re: Need custom car parts, where do I get...?

^Thanks! I just contacted Seatsavers, the price of their covers for two seats is less than the price I've seen at most other sites. Just waiting to hear back about the one seat price.

And how hard is it to string up a steering wheel cover? I was looking for something slip-on.

Wouldn't think it is too hard? Go from one hole across to the other until you are done? I have not done it before, but I'd guess it is like lacing up a shoe.

[roushstage2]

Re: Need custom car parts, where do I get...?

OK, so I decided to tint the windows myself. Anyone recommend any pre-cut tints? I'm looking for something of good quality, but not too expensive. Also, do I have to have a heat gun for the tint job? Can I use a blow dryer instead? This video shows a tint job without a heat gun. Also, would you recommend 35% grey or 50% black? I don't want anything too dark.

I would just have them tinted professionally. It really isn't that expensive, and most legit places have lifetime warranties for their tint as well.

I sure am, but honestly, you guys have provided more info on this topic than those 20 year olds who are too full of themselves to take the time to help anyone out.

What's wrong with us 20 year olds?

[Maserati Mario]

Re: Need custom car parts, where do I get...?

OK, so I decided to tint the windows myself. Anyone recommend any pre-cut tints? I'm looking for something of good quality, but not too expensive. Also, do I have to have a heat gun for the tint job? Can I use a blow dryer instead? This video shows a tint job without a heat gun. Also, would you recommend 35% grey or 50% black? I don't want anything too dark.

Tinting windows is a pain!
I've done all my cars and I can get the sides done ok.
But the back is always the hardest.
The problem is the quality of the tint.
In order to do a Professional Job you need Professional Tint
This stuff runs about $300 bucks a roll. So it's almost the same to have it done.
My experience with pre-cuts is they are to small and the quality stinks!
But give your side windows a try and you'll save some money.
Just remember to start from the bottom.
Yes you can use a hair dryer
The last tint I bought was Black Magic from wally world, like $12 bucks.
Worked fine,
You can email me for if you want to know more.

[agp423]

Re: Need custom car parts, where do I get...?

I sure am, but honestly, you guys have provided more info on this topic than those 20 year olds who are too full of themselves to take the time to help anyone out.

[Mike Pennington]

Re: Need custom car parts, where do I get...?

Are you a member of or have you visited the Cadillac CTS Forum?

I am sure they have the inside scoop for all sources for your vehicle

Mike

[agp423]

Re: Need custom car parts, where do I get...?

OK, so I decided to tint the windows myself. Anyone recommend any pre-cut tints? I'm looking for something of good quality, but not too expensive. Also, do I have to have a heat gun for the tint job? Can I use a blow dryer instead? This video shows a tint job without a heat gun. Also, would you recommend 35% grey or 50% black? I don't want anything too dark.

[agp423]

Re: Need custom car parts, where do I get...?

^Thanks! I just contacted Seatsavers, the price of their covers for two seats is less than the price I've seen at most other sites. Just waiting to hear back about the one seat price.

And how hard is it to string up a steering wheel cover? I was looking for something slip-on.

[roushstage2]

Re: Need custom car parts, where do I get...?

Custom pedals; check these guys out: http://www.ultimatepedals.com/
(Side note: the pedals on the main page look just like the one's my father CNC machined for a company for Porsche's.)

Steering wheel covers: http://www.wheelskins.com/

Seat covers: http://www.seatsavers.com/QuoteRequest.php
Most places sell in a pair, I'm assuming that is for cost reasons etc., for making a single cover. This place does have the option for integrated seat belts. Gave you the quote page so you can pick the options, etc, and get a hold of them about what you want.

[roushstage2]

Re: Need custom car parts, where do I get...?

Do the seats have airbags? One thing to check before covering it up if it does...

[agp423]

Re: Need custom car parts, where do I get...?

Yeaup, I only want 1 seat cover... I've looked everywhere online, they either only sell sets, or they sell single universals. And no universal seat cover accommodates seats with integrated seatbelt.

[john m.]

Re: Need custom car parts, where do I get...?

Hmm your requests are interesting but I have never heard of engraving in pedals, you could maybe look into getting some strutking pedals and have someone engrave them for you? And are you only wanting one seat cover?