Tweet
This was the car that I did first and in learning my steps and process I did not do it perfectly.
But what the car had was a solid layer of Glaze and NXT 2.0
The car sits in a garage but has a leaky roof. Figure the hood and windshield is covered in water, the roof to the rear is bone dry/dusty. very aggrivating.
I took her out for a much needed wash/dry.
After the NXT layer was put on, I followed up with some UQD so there is a layer of that too.
I hit the car with water and I never saw water shedding liked this. It just BLASTED off the car and since it has nice curves. It just looked cool, it beaded up soild and blasted off!
After washing with some soap that had a wax booster. I used my california wiper blade, then followed up with a Large Micro Fiber.
By the time the car was done it was still smooth to the touch. I was VERY excited by the results. I expect I will be washing it again next weekend and another layer of NXT will be going on and I will make sure it hazes up nice and good before removal!!
