• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

Application for Ultimate Compound

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Re: Application for Ultimate Compound

    Originally posted by vp920b View Post
    Will UC give a great result when using Hand Use? Will UC give a better result than SwirlX?

    Because SwirlX only made the swirl "vanish" a bit and light swirl, but deeper swirl/hologram can't leave from the paint.

    Thanks
    UC is a lot more aggressive than SwirlX, this mean it will provide more cleaning or abrading power to remove some paint off your car which is how you remove swirls and scratches.

    Because UX is more aggressive you might have to follow it with something less aggressive like SwirlX to get the best appearance results before applying a wax or paint sealant.

    Rubbing out a clear coat by hand is more than just smearing a product onto the paint, you have to work a small section for about a minute and wipe the product off and move on to the next small section. Rubbing out a car by hand with just Ultimate Compound, if you rubbed out the ENTIRE car will take you from 2-6 hours depending upon how bad the swirls are and how good you are at rubbing out clear coats by hand.

    It's kind of an art form, not just a mechanical rubbing process.

    What are you working on?

    Mike Phillips
    760-515-0444
    showcargarage@gmail.com

    "Find something you like and use it often"

    Comment


    • #17
      Re: Application for Ultimate Compound

      Even SwirlX must work on a small section, buff after 1 minute?

      Well, sometimes I was a bit "lazy" to use my rotary and in Indonesia, once a month I must give some Wax/sealant. But before giving a wax, I want my car to have a good result even using hand.

      Thanks

      Comment


      • #18
        Re: Application for Ultimate Compound

        Originally posted by Mike Phillips View Post
        How about a really good pictures of what you're working on and then a good focused picture of the scratches you're trying to remove?

        UC works great, if it's not getting the scratches out it usually,
        1. Scratches are too deep
        2. Paint is too hard
        3. Application technique needs to be tweaked

        How-To capture swirls, scratches, etchings and other surface defects with your camera


        How to place a picture into your message
        Digital cameras are GREAT! But if you don't know how to get your pictures off your computer and into your messages nobody's going to ever get to see your really cool pictures.
        Working with photos on discussion forums
        Hi Mike,
        After careful inspection yesterday. The watermark that I thought I have remove is still there.

        I would think why I am not able to remove the scratches it is most likely to be combination of no.1 and 2.

        I do not have access to digital camera. The nearest is a 5 mega pix camera phone. I will try to pick up what I am working on and have it posted.

        Comment


        • #19
          Re: Application for Ultimate Compound

          one of the "better" picture with swirls on my rear hood.
          I believe there are RIDS that I could not capture.




          Picture of the water mark on my rear bumper.



          Swirls on the rear bumper but did not manage to capture the water mark on this below photo.

          Comment


          • #20
            Re: Application for Ultimate Compound

            ^ I can barely see any swirl marks... Hahah

            Comment

            Your Privacy Choices
            Working...
            X