• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

Diluting APC for the 1st time

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Diluting APC for the 1st time

    Hi all

    I have just brought a container of APC for the 1st time to try after reading all about how good it is on here
    So time to mix some up and clean the inside of my car
    So my question is :

    How much would I dilute the APC all I have is a 500ml spray bottle
    The car needs a good clean inside so I wont it strong but not that strong that it will cause damage

    Any info would be great

    Cheers
    Have A Smurfie Day
    Take Pride In Your Ride...

  • #2
    Re: Diluting APC for the 1st time

    10 parts water, 1 part APC is good. I mix about 8:1 usually and use it for everything (interior, wheel wells ,tires, household, etc). 4:1 is strongest recommended.

    So you could do 400ml water, 40ml APC.
    2017 Subaru WRX Premium - WR Blue

    Comment


    • #3
      Re: Diluting APC for the 1st time

      Cheers will that be strong enough ?
      Have A Smurfie Day
      Take Pride In Your Ride...

      Comment


      • #4
        Re: Diluting APC for the 1st time

        Well, depends on your dirt, how you work in the APC, how strong you mix it...

        Can always try it, then add another 10ml of APC if you want stronger.
        2017 Subaru WRX Premium - WR Blue

        Comment


        • #5
          Re: Diluting APC for the 1st time

          10:1 is strong enough for many applications, if not try 5:1 ;-))

          Comment

          Your Privacy Choices
          Working...
          X