Tweet
Finished up this older Tahoe for a buddy of mine with an Escalade I take care of on a regular basis. Just wanted a quick one step and wax. I took it a little further for him because he comes to me all the time and he's my buddy of course.
Anyways... He wanted it cleaned up to get the paint looking better and not so dull and ridded with swirls. The passenger side had been repainted (very poorly I might add) and had a haze on those panels along with deep sanding marks (which you can see in some pics) but those weren't to be corrected on this "beater" this go around.
ONR wash with 4 MF's
Clayed w/Meguiars clay
Wheels/Tires/Wheel wells cleaned with APC+ and various brushes
Trim/Tires dressed with ShowRoomFX White pearl
Glass treated with Stoners Invisibile Glass
Corrected with Meguiars DA MF D300
Topped with Meguiars DA MF D301
Hood before. Paint was engulfed in deep swirling. (most of the truck looked this way)
After correcting with D300
Passenger fender. Strong haze and deeeeep swirling coupled with a poor paint job.
My buddy didn't want me to touch the passenger side but I couldn't let it go. I gave it two passes with D300.
Hood in sunlight.
Driver side rear quarter uncorrected:
Corrected
Haze on the passenger side door. If you look where my gloves are, you can seee the deep sanding marks.
Notice the clarity in the picture as apposed to the one above. Big difference, not perfect...but much better. (again he didn't want me to touch this side so I did it as a favor)
Trim had not been done in this picture yet. Still had to dress the top of the rubber on the door up top and was still using it to stand on.
Rear gate
Thanks for looking.
Questions/comments welcome
Anyways... He wanted it cleaned up to get the paint looking better and not so dull and ridded with swirls. The passenger side had been repainted (very poorly I might add) and had a haze on those panels along with deep sanding marks (which you can see in some pics) but those weren't to be corrected on this "beater" this go around.
ONR wash with 4 MF's
Clayed w/Meguiars clay
Wheels/Tires/Wheel wells cleaned with APC+ and various brushes
Trim/Tires dressed with ShowRoomFX White pearl
Glass treated with Stoners Invisibile Glass
Corrected with Meguiars DA MF D300
Topped with Meguiars DA MF D301
Hood before. Paint was engulfed in deep swirling. (most of the truck looked this way)
After correcting with D300
Passenger fender. Strong haze and deeeeep swirling coupled with a poor paint job.
My buddy didn't want me to touch the passenger side but I couldn't let it go. I gave it two passes with D300.
Hood in sunlight.
Driver side rear quarter uncorrected:
Corrected
Haze on the passenger side door. If you look where my gloves are, you can seee the deep sanding marks.
Notice the clarity in the picture as apposed to the one above. Big difference, not perfect...but much better. (again he didn't want me to touch this side so I did it as a favor)
Trim had not been done in this picture yet. Still had to dress the top of the rubber on the door up top and was still using it to stand on.
Rear gate
Thanks for looking.
Questions/comments welcome
Comment