If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
What pressure were you using in the video? Do you recommend light pressure for a nice constant rotation of the pad? Seems to work very fast also. Thanks for that video.
Heavy pressure was used with slow arm speed. The video was sped up 4x to shorten the length of the video.
For maxium defect removal, heavy pressure and slow arm movement gives me the best results. On this paint it corrected ver quickly, which was why I decided to capture a test spot. Not all paints will react the same and the depth of the defects themselves will play a role too. I was able to get about 90-95% correction on that test panel but there was a few deeper scratches left behind.
What pressure were you using in the video? Do you recommend light pressure for a nice constant rotation of the pad? Seems to work very fast also. Thanks for that video.
Leave a comment: