Tweet
Wheels/Tires:
Meguiar's Deep Crystal / Mother's All Wheel Cleaner on wheels
Meguiar's APC on tires
Meguiar's Hyper Dressing on tires
EZ Detail brush for the barrels
Wash:
Gilmour Foam Gun
Chemical Guys Citrus Wash and Gloss via Foam Gun and 2BM
Meguiar's Microfiber Wash Mitt
Clay:
Meguiar's OTC Clay
Meguiar's Last Touch
Paint Correction:
Flex 3401 VRG
Meguiar's G100
Meguiar's M105 / Meguiar's W8006 Pads
Menzerna Super Intensive Polish / LC Orange Pads / LC White Pads
Menzerna Nano Polish (106FF) / LC Grey Pad
Craftsman 500W Halogen Lights
LSP:
Menzerna Powerlock / Meguiar's Foam Applicator Pad (left 12 hours to cure)
Autoglym HD Wax
Interior:
Meguiar's Quik Interior Detailer
I was excited to detail this car because it is a show car and also unique!!! The car had very tasteful mods & it had horsepower to back it up. The car arrived clean. It only had very light swirl marks underneath a layer of Arizona dust. Here are some before pictures... Sorry I only have a few pictures because I couldn't really capture the swirl marks with the intense arizona sun.
Here are some wash pictures:
I tried getting some clay pictures but the embedded dirt was very light.
All taped up and ready to go:
After claying the car, I performed an IPA wipe down to see the true condition of the paint. I was shocked to see the amount of swirls the paint had!!! It didn't have that much swirls when we first inspected the car before delivering it to me. I guess the previous layer of wax hid all some of the swirls.
Since this car is a show car, I wanted the paint to look as perfect as possible. I decided to go ahead and use a 2 step detail right off the bat. I also recently received my Meguiar's M105 so I wanted to try that out as well. I used both Meg's M105 and Menz SIP throughout my paint correction phase. Here are some 50/50 shots:
Passenger Side Door:
Driver Side Door:
You can literally see the pearl popping in the after shots... The pearl flakes were more noticeable and the color of the paint changed from a light hazy blue to a deep and rich blue. Here's a 50/50 shot I took just trying to show the difference in the reflection. You can really notice the clarity improvement achieved.
Driver side rear quarter panel:
Passenger side rear quarter panel:
Approximate time: 12-13 Hours. I don't know why it took this long...
Meguiar's Deep Crystal / Mother's All Wheel Cleaner on wheels
Meguiar's APC on tires
Meguiar's Hyper Dressing on tires
EZ Detail brush for the barrels
Wash:
Gilmour Foam Gun
Chemical Guys Citrus Wash and Gloss via Foam Gun and 2BM
Meguiar's Microfiber Wash Mitt
Clay:
Meguiar's OTC Clay
Meguiar's Last Touch
Paint Correction:
Flex 3401 VRG
Meguiar's G100
Meguiar's M105 / Meguiar's W8006 Pads
Menzerna Super Intensive Polish / LC Orange Pads / LC White Pads
Menzerna Nano Polish (106FF) / LC Grey Pad
Craftsman 500W Halogen Lights
LSP:
Menzerna Powerlock / Meguiar's Foam Applicator Pad (left 12 hours to cure)
Autoglym HD Wax
Interior:
Meguiar's Quik Interior Detailer
I was excited to detail this car because it is a show car and also unique!!! The car had very tasteful mods & it had horsepower to back it up. The car arrived clean. It only had very light swirl marks underneath a layer of Arizona dust. Here are some before pictures... Sorry I only have a few pictures because I couldn't really capture the swirl marks with the intense arizona sun.
Here are some wash pictures:
I tried getting some clay pictures but the embedded dirt was very light.
All taped up and ready to go:
After claying the car, I performed an IPA wipe down to see the true condition of the paint. I was shocked to see the amount of swirls the paint had!!! It didn't have that much swirls when we first inspected the car before delivering it to me. I guess the previous layer of wax hid all some of the swirls.
Since this car is a show car, I wanted the paint to look as perfect as possible. I decided to go ahead and use a 2 step detail right off the bat. I also recently received my Meguiar's M105 so I wanted to try that out as well. I used both Meg's M105 and Menz SIP throughout my paint correction phase. Here are some 50/50 shots:
Passenger Side Door:
Driver Side Door:
You can literally see the pearl popping in the after shots... The pearl flakes were more noticeable and the color of the paint changed from a light hazy blue to a deep and rich blue. Here's a 50/50 shot I took just trying to show the difference in the reflection. You can really notice the clarity improvement achieved.
Driver side rear quarter panel:
Passenger side rear quarter panel:
Approximate time: 12-13 Hours. I don't know why it took this long...
Comment