Well i knew i had a Red Vito Van for a Paint Work correction job so i thought to myself i will use as normal Meg’s M83 with a Polishing Pad and then work my way up and depending on how bad it is i would do 2 or 3 passes or change to the Meg’s cutting pad.
I then had to top up my supplies so i called Matt @ wwwi4detailing.co.uk to get my M83 ordered as i knew i was going to need a lot for this job. I was on the phone to him and he said that he had just taken delivery of Meg’s new M105 ultra cut compound. After a little thinking about the product i thought i would order it anyway as i knew i would end up using it on something.
[IMG]http://i323.photobucket.com/albums/nn457/P4ULWRX/vito%20van/DSC06368.jpg[/IMG]
This was the van before i started it had been sitting out in the sun and had faded badly. So i thought i would tool myself up with my Rotary on a meg’s cutting foam pad and try this M105 out.
This side of the van took me 2 hrs to do. I would do 3 passes @ 1000rpm then 4 passes @ 1500rpm then 4 passes @ 1200rpm and then a final 2 @ 700rpm
This next picture has only been cut back using Meg’s most aggressive Cutting Compound on their scale. I can’t believe how good this stuff is.
ffice
ffice" />
[IMG]http://i323.photobucket.com/albums/nn457/P4ULWRX/vito%20van/sideafter.jpg[/IMG]
[IMG]http://i323.photobucket.com/albums/nn457/P4ULWRX/vito%20van/DSC06382.jpg[/IMG]
[IMG]http://i323.photobucket.com/albums/nn457/P4ULWRX/vito%20van/DSC06383.jpg[/IMG]
[IMG]http://i323.photobucket.com/albums/nn457/P4ULWRX/vito%20van/DSC06384.jpg[/IMG]
Give Matt a phone and order a bottle and see how good this stuff is. I thought it was going to take two days just on the paint but i ended up correcting the whole van in one day.
Good Time’s!!!!!!!!!!
I then had to top up my supplies so i called Matt @ wwwi4detailing.co.uk to get my M83 ordered as i knew i was going to need a lot for this job. I was on the phone to him and he said that he had just taken delivery of Meg’s new M105 ultra cut compound. After a little thinking about the product i thought i would order it anyway as i knew i would end up using it on something.
[IMG]http://i323.photobucket.com/albums/nn457/P4ULWRX/vito%20van/DSC06368.jpg[/IMG]
This was the van before i started it had been sitting out in the sun and had faded badly. So i thought i would tool myself up with my Rotary on a meg’s cutting foam pad and try this M105 out.
This side of the van took me 2 hrs to do. I would do 3 passes @ 1000rpm then 4 passes @ 1500rpm then 4 passes @ 1200rpm and then a final 2 @ 700rpm
This next picture has only been cut back using Meg’s most aggressive Cutting Compound on their scale. I can’t believe how good this stuff is.
ffice

[IMG]http://i323.photobucket.com/albums/nn457/P4ULWRX/vito%20van/sideafter.jpg[/IMG]
[IMG]http://i323.photobucket.com/albums/nn457/P4ULWRX/vito%20van/DSC06382.jpg[/IMG]
[IMG]http://i323.photobucket.com/albums/nn457/P4ULWRX/vito%20van/DSC06383.jpg[/IMG]
[IMG]http://i323.photobucket.com/albums/nn457/P4ULWRX/vito%20van/DSC06384.jpg[/IMG]
Give Matt a phone and order a bottle and see how good this stuff is. I thought it was going to take two days just on the paint but i ended up correcting the whole van in one day.
Good Time’s!!!!!!!!!!
Comment