I'm sure most if not all of you guys won't be familiar with this vehicle it's a 2003 model Isuzu Crosswind . The owner rarely washes it and its always parked under a tree, the paint was fairly easy to work with but this defects were just terrible. My process was Clay with Hi-Tech body sponge, So1o with a W4000 wool pad (Rotary), So1o with a W8000 polishing pad (Rotary), M82 with a W9000 finishing pad (Rotary) and as my LSP I used M20 followed by M26 applied by hand. Here are some pictures.
Couple of Pictures before the Job


Top of the Car

Hood Before

Hood After

Bumper Before

Bumper After

Job All Done

Please excuse me for the poor photography specially the before ones (it was taken at night) I'm still in the learning process when it comes to taking pictures.
Comments and suggestions are welcome.
Thanks to Nick a.k.a n737nc who gave me tips on working with the So1o system. This was my first time using the So1o, this is just a test run so to speak for my next and real detail with the So1o a MB SLK 500
Merry Christmas to one and all!
Couple of Pictures before the Job
Top of the Car
Hood Before
Hood After
Bumper Before
Bumper After
Job All Done
Please excuse me for the poor photography specially the before ones (it was taken at night) I'm still in the learning process when it comes to taking pictures.
Comments and suggestions are welcome.
Thanks to Nick a.k.a n737nc who gave me tips on working with the So1o system. This was my first time using the So1o, this is just a test run so to speak for my next and real detail with the So1o a MB SLK 500
Merry Christmas to one and all!
Comment