• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

Webinar Recording - Hybrid Paint Coating

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Webinar Recording - Hybrid Paint Coating

    Webinar Recording - Hybrid Paint Coating

    We hope this information is helpful from our March 16th, 2022 Webinar - Hybrid Paint Coating.

    Let's continue the conversation, comments, or feel free to ask questions within this thread.

    Nick Winn
    Product & Training Specialist | Meguiar's Online Forum Administrator
    Meguiar's Inc.
    Irvine, CA
    nawinn@meguiars.com

  • #2
    Re: Webinar Recording - Hybrid Paint Coating

    Did you ever find out about using a car cover during the curing time?
    Bill Strobel
    aka theamcguy
    Owner Independent Towing
    Fayetteville, NC
    Do It Right or Don't Do It At All.

    Comment


    • #3
      Re: Webinar Recording - Hybrid Paint Coating

      Originally posted by theamcguy View Post
      Did you ever find out about using a car cover during the curing time?
      Hi Bill,

      Yes, I did. We would not recommend using a car cover during the curing process (1st week) since it will prevent airflow around the paint and could actually slow cure time.

      For anyone wondering about humidity/hot conditions, (which came up in the webinar), Hybrid Paint Coating should theoretically cure faster in these conditions. Humidity/over night moisture from a vehicle being kept outdoors within first 24 hours or first week is not detrimental, what a user really should avoid is bulk water, from washing, or rain, within that first week, as this may remove some of the uncured coating and/or leave an uneven amount of cured coating on the surface depending on how much of it rinsed off.

      Hope this helps. Feel free to post further comments/questions.
      Nick Winn
      Product & Training Specialist | Meguiar's Online Forum Administrator
      Meguiar's Inc.
      Irvine, CA
      nawinn@meguiars.com

      Comment


      • #4
        Re: Webinar Recording - Hybrid Paint Coating

        Originally posted by Nick Winn View Post
        Hi Bill,

        Yes, I did. We would not recommend using a car cover during the curing process (1st week) since it will prevent airflow around the paint and could actually slow cure time.

        For anyone wondering about humidity/hot conditions, (which came up in the webinar), Hybrid Paint Coating should theoretically cure faster in these conditions. Humidity/over night moisture from a vehicle being kept outdoors within first 24 hours or first week is not detrimental, what a user really should avoid is bulk water, from washing, or rain, within that first week, as this may remove some of the uncured coating and/or leave an uneven amount of cured coating on the surface depending on how much of it rinsed off.

        Hope this helps. Feel free to post further comments/questions.

        Oh man. Hopefully on that week of applying it that I does not rain! Weather can change within the 24hrs. #notyetraingods. Thank you Nick for the info!

        Comment

        Working...
        X
        gtag('config', 'UA-161993-8');