• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

Need help

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Need help

    Need help..
    I just bought the following:
    - NXT Car Wash
    - NXT Tech Wax 2.0
    - Swirl Remover (from pro. line)
    - Clay bar kit
    - Polish (step 2 from the 3 step system)
    - Scratch X
    - And I have my own paint cleaner

    I know I should wash the car..
    But then I'm not sure if I should clay before I paint clean it..

    But my thinking was:
    1 Wash
    2 Clay - to remove upper contamination from the clear cot
    3 Scratch X - to remove scratches (bigger) and bigger swirlmarks from the clear coat
    4 Swirl remover - To remove finer swirlmarks
    5. use paint cleaner to make the paint shine more again
    6. use polish to make the color be more pretty
    7. Wax it

    Am I all wrong here and should I do it in another way? Or what should I do?

  • #2
    Re: Need help

    You would do this
    1 Wash
    2 Clay
    3 Scratch X / Swirl Remover (depending on what are you trying to remove)
    4.Polish
    5.Wax

    Read this link, I could help a lot
    Meguiar's 5-Step Paint Care Cycle

    Comment


    • #3
      Re: Need help

      follow the steps outlined above and your car will be looking great. Post some before and after pics if you can.
      quality creates its own demand

      Comment

      Your Privacy Choices
      Working...
      X