? on #16.

[TKDDAD]

Re: GOT IT !!!

Originally posted by TKDDAD
MY can of #16 showed up today !!!!...

Just in time to use it on my in-laws badly neglected black buick century...I'll post befores and afters on Monday....should be fun as it's supposed to be a BEAUTIFUL weekend here....thanks again Buellwinkle for the lead to WestMarine....I really appreciate it!!

Well actually never used #16 on the in-laws car since I didn't have any time left in the day before the car left...

[Djmigs]

Hi TKDDAD,


Did you finally use the m16?

i received my order the same day as you from the same place, i just didnt have time since i been putting in long hours, i bought three cans of m16....just wanted to see how easy it is to apply and remove with machine if not the by hand ..

i probably wont use it till next week or so....

Let us Know how it turns out....

[Accumulator]

Originally posted by Djmigs
i had to try it atleast once in my lifetime..

Originally posted by Djmigs
...i bought three cans of m16....

Heh heh, if you apply it as thinly as you oughta, those three cans will probably last you the rest of your life

Any way to *further* stress how you folks need to *not* put it on thick? I'd rather be a broken record about this than have somebody struggle with a too-thick application that dried like cement.

If there's a lot of #16 left in your pad at the end of the job, well, that's a clue to use a lot less next time.

[Mike Phillips]

Originally posted by Accumulator
Any way to *further* stress how you folks need to *not* put it on thick? I'd rather be a broken record about this than have somebody struggle with a too-thick application that dried like cement.

I agree very strongly with this statement. I've seen people put toweling scratches into their car's paint from pushing too hard and struggling to remove too thick of a coat of M16.

[TKDDAD]

Originally posted by Djmigs
Hi TKDDAD,


Did you finally use the m16?

i received my order the same day as you from the same place, i just didnt have time since i been putting in long hours, i bought three cans of m16....just wanted to see how easy it is to apply and remove with machine if not the by hand ..

i probably wont use it till next week or so....

Let us Know how it turns out....

Hi Djmigs....you must be the one that bought out what they had because they don't list it any more on their site...I agree, 3 cans will last forever....I haven't used it yet but maybe this weekend if weather cooperates...gonna clay, NXT, and then #16...I'll post when I'm done...

[Buellwinkle]

My wife got a new car this past weekend so we had to sell her '97 silver Honda CR-V. I wax it with #16, put #38 on the black bumpers/trim, sprayed tire shine stuff on the tires and detailed the interior with the new interior detailing spray and the car looked and smelled fantastic. Took it to the car sale at the local college and people couldn't stay away, sold in 10 minutes with 2 offers. Mike was right, detailing the engine with Hyperdressing gave them the impression that I must be doing my oil changes every 2K miles for it to look like that good.