• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

Using G-100 To apply DC #2

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Using G-100 To apply DC #2

    Does anybody know if DC#2 can be applied to the finish using a G-100 and 9006 finishing pad??? It wouldn't be a problem to apply it by hand but I'm just trying to see if this would be ok in order to save some time and energy. However, whatever will give me the best result is what I'll go with. Thanks.
    Jason
    2004 Jetta GLS 1.8T
    Tags: None
  • #2
    Yes, you can apply Deep Crystal Polish with the dual action polisher using either the W-8006 or W-9006 pads. Use a speed setting of 3.0 to 4.0
    Mike Phillips
    760-515-0444
    showcargarage@gmail.com
    "Find something you like and use it often"

    Comment

    Previous template Next
    Your Privacy Choices
    Working...
    X