• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

orbital buffer and random buffer/polisher

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • orbital buffer and random buffer/polisher

    My father in law just give me a 10 inch orbital buffer and I just found out that my son have a 6 in random orbit buffer/polisher that he left in the storage shed when he moved out. From reading the many post on the site, it look as both of these tool are good for a noob (like me).They just will not remove any swirls mark but is good for polish and wax.I'm guess it will also be good to remove wax also. I'm swirl free as of now. The question is what bonnet would l use to lay the polish and wax down? An which bonnet would I use to take it off with? An do you take it off the same way you lay it down? Or is it better to remove by hand? This may be the wrong thread but I have to ask this..I saw some where in a tread about you can QD or QW while you dry. Do you use the same MF towel while you do this? An if so do you go over it with a MF detail towel to buffer it up? Please help as you can see I'm a noob and just don't want to visit a paint shop.If any of my question sound dumb please don't laugh at me I just don't know.Thanks all in advance.
Your Privacy Choices
Working...
X