Tweet
Last year I bought a 50 gallon tank for mobile detailing and used a small pump to pump out the water. The pump didn't last all summer so I've been looking for a replacement. I recently bought a pressure washer thinking the pump inside it would pump water out of the tank, but when I hooked it up, nothing. So what can I do to make this setup work? How do I get the water out of the tank and to the pressure washer??
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
-
Re: Water Tank Help
Get a sureflow or flowjet on demand pump. On demand means when you open the valve it turns on and when water stops flowing it turns off. They come in 12v....I have one on demand pump hooked up to my tank and no pressure washer....it works better than my hose at my house. You can get one for less than a 100 bucks that will last for years. -
Re: Water Tank Help
+1
Here's an example of a 3GPM model.
Comment
-
Re: Water Tank Help
Thanks for the links guys, I ordered one and hope to get it soon. What are you guys using to power the pump?Comment
Comment