Tweet
Is it hard to apply DACP? Inever used it before and I was wondering if it is hard to use. And what is the best way to apply it.
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
Last edited by JG_Detailing; Sep 13, 2004, 07:56 AM. -
Re: Is it hard to apply DACP?
Compared to regular waxes such as NXT, it is a little "tough" to apply and remove. But, as long as you have a PC, it would be much easier. Use the W-8006 pad to apply and set the speed to 5.0 "slowly". Polish the compound until some white residues appeared on your paint surface. You have to do one section at a time. Use MF towel or bonnet to wipe off the residues and re-wash your vehicle before applying the polish or wax.Originally posted by chevyman2001
Is it hard to apply DACP? Inever used it before and I was wondering if it is hard to use. And what is the best way to apply it.
The above procedures were my 1st experience using the DACP. -
Hey,
The key with #83 DACP is to work the product until there is only a light dust/residue remaining. This will take some time with the PC. So work slowly, with adequate pressure on the buffer's head.
TimComment
Comment