Tweet
If one were going to lay down a #7 coat followed by 2 coats of NXT, would they be better off to use the polishing pad for the NXT coats? From what I've read the finihsing pad might get a little clogged with the NXT wax.. Thing is, will the polishing pad remove the #7 with it's light abrasiveness?
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
2018 Subaru Outback 3.6R Touring - Crystal White Pearl -
Re: #7 then NXT - Polishing pad or finishing pad for NXT?
I have never had a clogging problem with NXT and the W-9006 pad yet...This combo should not remove #7, except for any excess left over.Originally posted by Hellspawn
If one were going to lay down a #7 coat followed by 2 coats of NXT, would they be better off to use the polishing pad for the NXT coats? From what I've read the finihsing pad might get a little clogged with the NXT wax.. Thing is, will the polishing pad remove the #7 with it's light abrasiveness?r. b. -
Re: Re: #7 then NXT - Polishing pad or finishing pad for NXT?
HiOriginally posted by Rusty Bumper
I have never had a clogging problem with NXT and the W-9006 pad yet...This combo should not remove #7, except for any excess left over.
I was just a bit concerned about the polishing pad scrubbing off the #7. After a problem I was having (separate post on here) I was wondering if I needed to stay away from the finishing pad, but I will give it a try.
thanks2018 Subaru Outback 3.6R Touring - Crystal White PearlComment
Comment