Originally posted by americanlt
View Post
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
Topping Ultimate Fast Finish
Collapse
X
-
Re: Topping Ultimate Fast Finish
-
Re: Topping Ultimate Fast Finish
This is confusing. I thought it was recommended to use your favorite wax first and then top it with Ultimate Fast Finish. As this would "lock" the first layer of wax in for extended protection????
Leave a comment:
-
Re: Topping Ultimate Fast Finish
Originally posted by 02Rodeo View PostNo I meant if when/if it sits over night to cure should you then wipe it down before applying wax or sealant.
Leave a comment:
-
Re: Topping Ultimate Fast Finish
No I meant if when/if it sits over night to cure should you then wipe it down before applying wax or sealant.
Leave a comment:
-
Re: Topping Ultimate Fast Finish
Originally posted by 02Rodeo View PostIs it recommended to wipe it down before applying a wax or sealant..
Leave a comment:
-
Re: Topping Ultimate Fast Finish
Originally posted by Nick Winn View PostHi adadkins,
You could absolutely apply these products in this manner. The appearance & look that is obtained from a wax is super subjective & comes down to your own personal preference. Applying the products in this manner would not negatively impact the performance of UFF..
- Nick
Leave a comment:
-
Re: Topping Ultimate Fast Finish
Happy to hear you are enjoying Ultimate Fast Finish and Thanks for sharing the update.
Leave a comment:
-
Re: Topping Ultimate Fast Finish
Here's how the UFF is holding up after a little over 3 months. I've been very pleased with how it's performed thus far. At the time of these photos, I haven't topped with M26 in over a month. I really like the look of the M26 top, but the UFF alone has continued to repel dirt and bead water quite nicely.
Leave a comment:
-
Re: Topping Ultimate Fast Finish
Welcome to Meguiar's Online Aaron. I feel your pain on the salted roads, although here in L'Burg we didn't get the last bit of white stuff that you did. My son collected the crud on his car I'm sure, he's at VT. I just recently added Meg's Fast Finish to his Subie. Looking forward to see how it preforms.
Leave a comment:
-
Re: Topping Ultimate Fast Finish
Thanks Nick! I'll definitely keep the thread updated with durability; thus far we've had salted roads, snow, and rain here in VA but the truck looks almost as good as it did right after waxing. It is a good looking truck, just gotta finish a little work on the front end from avoiding a deer collision (hence hiding the front bumper). I appreciate the recommendation of #40, I do like the lower sheen products, so it should be right up my alley.
Leave a comment:
-
Re: Topping Ultimate Fast Finish
Looks great! Feel free to follow up & let us know how your maintenance routine goes & the durability. Nice looking truck, I am a sucker for single cab trucks & extended cab trucks 2. On a side note, if you are a fan of low sheen, original looking tires, our #40 Vinyl & Rubber Cleaner/Conditioner, applied with a foam applicator pad is a favorite of many.
- Nick
Leave a comment:
-
Re: Topping Ultimate Fast Finish
Finally got the whole routine completed:
Wash
Ultimate Polish
Ultimate Fast Finish
M26 Hi-Tech Yellow Wax
I'm definitely pleased with how it all turned out...
After UFF
Topped with M26
Leave a comment:
-
Re: Topping Ultimate Fast Finish
Thanks for your help Nick! I'll have to see if I can get some pictures of the final product up when I get it done in a couple days.
-Aaron
Leave a comment:
-
Re: Topping Ultimate Fast Finish
Hi adadkins,
You could absolutely apply these products in this manner. The appearance & look that is obtained from a wax is super subjective & comes down to your own personal preference. Applying the products in this manner would not negatively impact the performance of UFF.
- Nick
Leave a comment:
Leave a comment: