Removing Overspray From Plastic.

[desgnr]

My Problem.
I used Meguiar's Ultamite Interior Detailer on my dash & i got some overspray on my Plastic in front of the speedometer.
Now i can't get these spots off the plastic.
Any Suggestion's would be greatly appreciated.

[The Guz]

Re: Removing Overspray From Plastic.

It's a water based product. A damp microfiber with warm water should get it off.

A quick tip. Spray a towel with the product next time to avoid overspray.

[Nick Winn]

Re: Removing Overspray From Plastic.

We are sorry to hear about your experience using our Ultimate Interior Detailer. We have a product, Meguiar's PlastX, which can be used to remove these spots on the clear plastic. This should be applied to a surface which is clean and free of dust, and applied with a soft foam applicator pad by hand, like our X3070 Soft Foam Applicator Pad. These spots should come out quickly and easily, so there is no need to rub aggressively. Wipe off with a clean microfiber towel. Our Ultimate Interior Detailer is approved for use of clear plastics, so this feedback will be documented internally. Did the surface happen to be warm or hot? Did the product dry on the clear plastic surface?

We hope this information was helpful. Feel free to contact our Customer Care Center @ 800-347-5700 for immediate assistance, Monday - Saturday. If you would like, we can also send you the products we have mentioned will work to remove these spots. PlastX is also available in most major auto parts stores.