Has anyone seen a microfiber pad for the DA Power system? Does this even exist?
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
DA Power System
Collapse
X
-
Re: DA Power System
I saw this a while ago, but never found a place selling it though"STRIFE" aka Phil
2005 Infiniti G35 Coupe (IP/ aka White) the Toy
2011 Subaru Impreza (SWP/ aka White) the DD
2017 Subaru Forester (CWP/ aka White) Wifey's
-
Re: DA Power System
Yea...pretty sure those pads are for interior work.
OP: Pretty sure you can use a 4.25" MF pad from LC if working on paint?"STRIFE" aka Phil
2005 Infiniti G35 Coupe (IP/ aka White) the Toy
2011 Subaru Impreza (SWP/ aka White) the DD
2017 Subaru Forester (CWP/ aka White) Wifey's
Comment
-
Re: DA Power System
The 3" microfiber pads we have made since we introduced the whole DA Microfiber Correction System will fit on the DA Power System, but we don't recommend them. The DAPS is a forced rotation tool, meaning it has the same movement as a Flex 3401 for example, and microfiber discs tend to create a lot more haze with this sort of movement than they do with more traditional DA movement. Forced rotation is sort of hybrid of DA and rotary movements, and you really don't want to use microfiber pads on a rotary; they'll haze like crazy. Does that mean you should never, every try using microfiber pads on this tool? No, but if you don't like the results just remember these words, and the reason for them as stated above: we don't recommend it.Michael Stoops
Senior Global Product & Training Specialist | Meguiar's Inc.
Remember, this hobby is supposed to be your therapy, not the reason you need therapy.
Comment
Comment