Tweet
Completed my first wash and wax of the season. After washing the car and while it was wet, I used a Clay bar on the horizontal surfaces. Couldn't believe how smooth the paint felt afterward! Then I applied ColorX using an orbital buffer and removed when dry. Finally, I waxed using NXT and the buffer. Results were outstanding on my '03 Matrix with silver metallic paint.
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
Art Layton -
Looks good from the small picture. Do you have any more pictures, which are larger?
EricTalk it over folks. Communication is the key.
--Jerry Springer -
Do you have more pics? I was going to use this combo next time I wax my truck.Comment
-
Here is another picture of the hood. Unfortunately, metallic silver doesn't have the deep reflection of black or red. I just finished my wife's 2001 Volvo S60 with the same process. Looks almost better than new! Both cars sit outside; no garages.Art LaytonComment
-
another pic
this should be a little bigger.Art LaytonComment
Comment