Tweet
I have tried Maguiars Plastic Restore as well as some Mothers Back to Black and I am still unable to correct the problem with these mud guards. Any suggestions?
t
t
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
-
Re: Help w/ 2000 tundra black mud gaurds
We don't have a product with that specific name - are you talking about Gold Class Trim Detailer or maybe Ultimate Protectant? In either case, we'd recommend cleaning the area thoroughly with M39 Heavy Duty Vinyl Cleaner or a good All Purpose Cleaner, allow it dry fully, then apply a small amount of Ultimate Black and work it in very thoroughly. There should be no excess to wipe off if you use it properly (ie, sparingly) and it will dry completely dry to the touch.Originally posted by THERUIZFAMILY View PostMichael Stoops
Senior Global Product & Training Specialist | Meguiar's Inc.
Remember, this hobby is supposed to be your therapy, not the reason you need therapy.
-
Re: Help w/ 2000 tundra black mud gaurds
Think the OP is refering to this
In anycase, cleaning the mudflaps with APC+ or super degreaser, dry, then applying a couple coats should fix that dullness.......yea a little bit of product goes along ways, maybe a quarter size blob on a foam pad?"STRIFE" aka Phil
2005 Infiniti G35 Coupe (IP/ aka White) the Toy
2011 Subaru Impreza (SWP/ aka White) the DD
2017 Subaru Forester (CWP/ aka White) Wifey'sComment
-
Re: Help w/ 2000 tundra black mud gaurds
Yes, I did mean Ultimate Black .. I will give the M39 followed by Ultimate Black a shot...I'll put pictures up this weekend.....
Comment
Comment