3inch backing plate to use with G110

[Grip]

Which 3" backing plate do I purchase when using a G110v1.

Meguiars W63 or the Meguiars S3BP?

If I purchase the W63 will it come with the threaded bolt so I can attach it to the G110v1.

Thanks.

[Marc08EX]

Re: 3inch backing plate to use with G110

You need the S3BP. This is the appropriate backing plate for your g110v1 or any D/A polisher for that matter.

The W63 is for the rotary.

[Nick Winn]

Re: 3inch backing plate to use with G110

You will want to use our S3BP Professional 3 Inch Backing Plate. If you are going to use this for our 4 inch Soft Buff Pads, the pad part #'s are the W8204 4" Yellow Foam Polishing Pad & W9204 4" Black Foam Finishing Pad. The W63 is for a rotary.

[Marc08EX]

Re: 3inch backing plate to use with G110

This backing plate is also perfect for the 3" Microfiber cutting and finishing discs!

[Grip]

Re: 3inch backing plate to use with G110

thank you for your fast response. Time to purchase the correct tools for the job.

[DragoneFire]

Re: 3inch backing plate to use with G110

Getting ready to buy some new products. I was looking for the pads above and backing plate to use in between the ribs on top of my vehicles. Are the numbers still good and can I order from Meguiars. I looked on Meguiars direct.com site and couldn't find them. Anyone order some recently?

[Nick Winn]

Re: 3inch backing plate to use with G110

Getting ready to buy some new products. I was looking for the pads above and backing plate to use in between the ribs on top of my vehicles. Are the numbers still good and can I order from Meguiars. I looked on Meguiars direct.com site and couldn't find them. Anyone order some recently?

Certain Meguiar's Professional Mirror Glaze & Detailer Line products are not sold direct. They can be purchased through distributors, including auto body or automotive paint supply stores which sell our products, and on-line detailing supply companies.

[Pip Poppy]

Re: 3inch backing plate to use with G110

Will the adapters supplied with the S3BP fit a W6814mm to enable that backing plate to be used on a DA?
I have inadvertently purchased a W68 instead of a W68DA.
I have also bought a Rotary to DA adapter but that is a 5/8 to 5/16 adapter when the backing plate is 14mm so the adapter is no good to me either.
Now if one of the S3BP adapters will fit on the W68 then I can kill two birds with one stone