What next????????????????

[skyguyz]

My Wife's Audi A6 is "getting the treatment" after a long winter and her paint was in a little worse shape than I thought. I've washed it with Zymol and used Meg's clay.

Now my question is what would you use next as a pad/paint cleaner/swirl remover?

*Used Menzerna Intensive Polish with Edge 2000 blue polish pad
I plan on using Menzerna Intensive Polish whith Edge 2000 yellow light cut pad
and go over the area already done, Just started and didn't really like the results.

My next step is to use Edge 2000 blue polish pad or white pad with Meg's # 9 SR.

I'd hate to order/buy another product
1- since Menzerna Intensive Polish is supposed to do the job on paint in this condition.
2-Stop the job and wait for UPS to deliver a new product,(Des Moines dosen't have the greatest selection of products.)
And yes, I've already done my NSX with the PC 7424 and am comfortable with it's usage and methods for various products. Not a pro by no means, but comfortable.

*Pics are after claying

Thank you in advance for your reply!

[Mike Phillips]

You can always try using what you already have and then re-evaluate. From the pictures, it looks like a job for M80 Speed Glaze with a W-8006 foam polishing pad on the dual action polisher on the 5.0 setting. Follow this with your choice of wax.

Mike

[travisdecpn]

You have your work cut out for you, Audi clear is super hard. If you start with IP, you can follow up with either FP or #80 like Mike mentioned about.