Tweet
My car is black with metallic. It's a factory clear coat I was thinking of trying a polish. I just want a polish as right now I have no real defects. Is there a polish that doesn't stain available. I'll be working by hand.
Thanks
Thanks
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
Rick -
Re: NEED a POLISH
If it's a black metallic with modern clear coat I would recommend Ultimate Polish/ Ultimate Wax duo. -
Re: NEED a POLISH
I also have a black car and use ultimate polish. After polish you would want to sue a your favorite wax. I prefer Gold Class paste wax.Comment
-
Re: NEED a POLISH
Ultimate Polish is an excellent choice here, but if you get it on black plastic or vinyl trim and allow it to dry, you will most likely see some staining. But if you just pay attention to what you're doing and immediately wipe off any that might get on those trim pieces, you shouldn't have any issues at all. Keeping a clean microfiber towel at hand so that you can do just that is a good idea, even if you use some masking tape to cover that trim first.Michael Stoops
Senior Global Product & Training Specialist | Meguiar's Inc.
Remember, this hobby is supposed to be your therapy, not the reason you need therapy.
Comment
Comment