Re: White Fiesta ST detailing.
The ones here are always the same, 128:1. So could be 128ml water to 1ml soap, 128deciliterl water to 1 dl soap, or whatever measurement you chose.
Yeah, sounds good.
The 12 hours is for absolute best looks... up to you if you wait that long, or not.
Yeah, if the car is dusty/dirty, you'll want to wash, or use a quick detailer.
I have a question about delluting gold class carwash. It gives different ratio than NXT carwash in the back. It says "pour 4 capfuls of product and add 4L of water...". this is double that NXT than
?

I'm finally getting ready to do the full 5 step cycle to my pride and joy. I was thinking of not using DC1 + DC polish after clay, but instead just use SwirlX and then NXT 2.0 wax, cos in that case there's less elbow grease involved, cos by the time I wash, dry, clean around doors, etc. I'm completely wasted :-).
I'll use some ScratchX 2.0 if needed on some insulated locations.
as I understand SwirlX had polishing oils and also my car is pure white so I don't need alot of this stuff anyway, right?
I'll use some ScratchX 2.0 if needed on some insulated locations.
as I understand SwirlX had polishing oils and also my car is pure white so I don't need alot of this stuff anyway, right?
BTW I'm thinking of doing 2 coats of wax (min 12hours apart) but I will definitely need to wash/clean the car before the 2nd application cos I don't have the garage to keep it clean overnight :-(, so should I just wash it normally with NXT 2.0 or...?
Yeah, if the car is dusty/dirty, you'll want to wash, or use a quick detailer.
Comment