Meguiar's 2.0 W7207 Soft Buff Cutting Pad with DAS 6 DA

[paosuperdan]

Where is the foult?? What iam doing wrong ?? I use those pads with DA polisher on Half a Car

[Markus Kleis]

Re: Meguiar's 2.0 W7207 Soft Buff Cutting Pad with DAS 6 DA

What machine are you using and at what speed?

Which backing plate did you use?

[Marc08EX]

Re: Meguiar's 2.0 W7207 Soft Buff Cutting Pad with DAS 6 DA

It looks like a non-Meguiar's backing plate with too much pressure was the culprit.

[greg0303]

Re: Meguiar's 2.0 W7207 Soft Buff Cutting Pad with DAS 6 DA

2.0 Soft Buff pads should be used with W68DA backing plate for proper support.

As Mark mentioned above running your polisher on high speed for long period of time, not fully drying the pad before reusing it (intense steam) may cause its damage.

As I remember correctly Kestrel does not recommend pads larger than 150mm (6.5") for its DAS-6 DA polisher.

[paosuperdan]

Re: Meguiar's 2.0 W7207 Soft Buff Cutting Pad with DAS 6 DA

thanks for reply, backing plate is non meguiar's 6". In Europe they seling DAS 6 with

• Kestrel DAS6 Dual Action Polisher x1
• Meguiar's #80 Speed Glaze x1
• Meguiar's #83 Dual Action Cleaner Polish x1
• Meguiar's 2.0 W7207 Soft Buff Cutting Pad x1
• Meguiar's 2.0 W8207 Soft Buff Polishing Pad x1
• Meguiar's 2.0 W9207 Soft Buff Finishing Pad x1
• 6" BP

It mean it is wrong?? With 6" BP should be 6" pad?

[Marc08EX]

Re: Meguiar's 2.0 W7207 Soft Buff Cutting Pad with DAS 6 DA

thanks for reply, backing plate is non meguiar's 6". In Europe they seling DAS 6 with

• Kestrel DAS6 Dual Action Polisher x1
• Meguiar's #80 Speed Glaze x1
• Meguiar's #83 Dual Action Cleaner Polish x1
• Meguiar's 2.0 W7207 Soft Buff Cutting Pad x1
• Meguiar's 2.0 W8207 Soft Buff Polishing Pad x1
• Meguiar's 2.0 W9207 Soft Buff Finishing Pad x1
• 6" BP

It mean it is wrong?? With 6" BP should be 6" pad?

Do you have a picture of this BP? I think the fault underlies in the edge of the backing plate. The BP you have might have a too sharp of an edge. When you apply pressure while doing passes, it might cause some stress marks to the pads. The Meguiar's 6" BP has a rounded edge so applying pressure wouldn't cause too much of a stress mark on the edges of the BP.

[paosuperdan]

Re: Meguiar's 2.0 W7207 Soft Buff Cutting Pad with DAS 6 DA

http://imageshack.us/photo/my-images/98/img0276hi.jpg/

[paosuperdan]

Re: Meguiar's 2.0 W7207 Soft Buff Cutting Pad with DAS 6 DA

I dont know how to proper insert image

http://imageshack.us/photo/my-images/98/img0276hi.jpg/

[paosuperdan]

Re: Meguiar's 2.0 W7207 Soft Buff Cutting Pad with DAS 6 DA

i cant post anything without moderator approve it. Images

[Marc08EX]

Re: Meguiar's 2.0 W7207 Soft Buff Cutting Pad with DAS 6 DA

i cant post anything without moderator approve it. Images

Try uploading it to a different image server like flickr or something like that. Then use the [img] tags around it.

[paosuperdan]

Re: Meguiar's 2.0 W7207 Soft Buff Cutting Pad with DAS 6 DA

i am trying imageshack

[paosuperdan]

Re: Meguiar's 2.0 W7207 Soft Buff Cutting Pad with DAS 6 DA

anything with links inside dont go i send you pm

[paosuperdan]

Re: Meguiar's 2.0 W7207 Soft Buff Cutting Pad with DAS 6 DA

[Marc08EX]

Re: Meguiar's 2.0 W7207 Soft Buff Cutting Pad with DAS 6 DA

I received your PM! Please use the W68DA backing plate and this should solve your issue. Hope this helps!