Tweet
Just could not wait for the G110V2 and brought myself the GG6. What would be the best buffer pads for a stock GG6?
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
-
Re: GG6 Buffer Pads needed
If you go with Meguiar's then it's Soft Buff 2.0 pads. They are very durable and machine washable. You can get them in 7" (W68DA backing plate) and 4" (S3BP backing plate) diameter.
Yellow polishing pads and black finishing pads it's all you need. -
Re: GG6 Buffer Pads needed
If you go with our Soft Buff 2.0 pads do yourself a huge favor and pick up a W68DA backing plate to go along with them. It will make a huge difference. Or, you could stick with the backing plate that came with your buffer and use our original Soft Buff pads - W8007 for polishing, W9007 for polish and/or wax.Michael Stoops
Senior Global Product & Training Specialist | Meguiar's Inc.
Remember, this hobby is supposed to be your therapy, not the reason you need therapy.
Comment
-
Re: GG6 Buffer Pads needed
Thanks for the advise. I will do that.Comment
-
Re: GG6 Buffer Pads needed
I highly recommend going with the 2.0 pads and matching backing plate! I have the GG6 and was using the stock backing plate and 1.0 pads and it worked well but tore up a couple of pads, partially due to user error and partially due to the way the pads and backing plate meet at the edge.. I switched over to the new stuff and it works so much better!
ADS has good pricing on pad combos too... http://www.autodetailingsolutions.ne...uff2combo.htmlJoel
1976 Cutlass S
2001 PT Cruiser
1990 454SS
1989 Suburban
Comment
Comment