Tweet
What type of buffer pad should i use on a boat which has oxidation? What speed should i run to do this? This is a first!!! Need some help!! Thanks.
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
-
Re: Using a buffer
Rotary Buffer or DA?
If a DA, you can look into a cutting pad, the gel coat is a bit tougher than auto paint.2017 Subaru WRX Premium - WR Blue -
Re: Using a buffer
It is also going to depend on what type of polish or compound you are going to be using. We need more info to make a solid recommendation for you.Comment
-
Re: Using a buffer
As the other guys mentioned, it will really help to know what kind of buffer you're using - DA or rotary. There are so many combinations available, and which you choose will depend not just on the tool used, but the condition of the boat and your skill/experience level.
Have a read through this write up of a badly oxidized boat we corrected here in our own garage a while back - it may give you some pointers and suggestions.Michael Stoops
Senior Global Product & Training Specialist | Meguiar's Inc.
Remember, this hobby is supposed to be your therapy, not the reason you need therapy.
Comment
Comment