ColorX or SwirlX

[Blueline]

My ColorX is getting low and it is time for another. I have been reading about SwirlX and am wondering which is better. I have NO swirls (or very, very few) and have always used ColorX and topped it off with #16.
So, any advantages to SwirlX over ColorX? Or is it like wax in general........better is in the eye of the beholder?
Thanks.

[Don]

Re: ColorX or SwirlX

Swirl-X is a cleaner/polish-no wax. Color-X is a three-in-one product, cleaner/polish/wax.

[Shawn T.]

Re: ColorX or SwirlX

If you truly have no swirls then I would continue to go with Colorx until (if ever) your finish has any swirls instilled. Swirlx would be the solution for moderate swirl marks. Good luck!

[J. A. Michaels]

Re: ColorX or SwirlX

No swirls. Color-x is a great aio. If you need paint correction, try the swirl-x.

[Murr1525]

Re: ColorX or SwirlX

Swirlx is better if you needed correction, or wanted to use a pure polish and then wax.

[Blueline]

Re: ColorX or SwirlX

Thanks all.
No swirls really. I am very careful washing, (two bucket, two mitts) and do so only in straight lines.
Rinse water beads up and mostly runs off, and I pat dry what little is left. There might be a straight line, very, very, minor scratch in the odd place, but ColorX has always been able to deal with them. I may try the SwirlX just for something different since I am going to finish off with #16 anyway.
Thanks for the help.

[Murr1525]

Re: ColorX or SwirlX

2 coats of #16 in that case.... SwirlX has no wax in it.