Trouble getting all nxt 2.0 off car?

[gmq]

I put a second coat of nxt2.0 on my car, and I'm having trouble getting the last of a small film of it off? Any guidance? This is worrisome now that the sun hit it... Thanks.

[akimel]

Re: Trouble getting all nxt 2.0 off car?

Did you see this recent thread? Quite likely you did not give the wax sufficient time to set up and dry.

Your best bet at this time is to quick detail your car with Quick Detailer, Last Touch, or UQD. Hopefully this will remove any remaining wax residue. If that doesn't work, wash your car again. And if the car wash doesn't solve the problem, apply a fresh coat of NXT, following the principle of "like removes like":

Anytime you have any problems at all removing product because of smears, or difficulty, remember, Like removes like.

Re-apply NXT Tech wax to a small section, say one quarter of the hood. Allow to dry till it swipes clear, then gently wipe the excess off. Now inspect that area as compared to the rest of the hood. If you do everything correctly, that area should be clear and streak free, if so, the repeat to the entire car or any affected area.

Keep us updated on your progress.

Cheers,
Al

[gmq]

Re: Trouble getting all nxt 2.0 off car?

Thanks for your thoughts. Let me ask you, if I used a Carnauba Paste wax, would that be "like enough" to use to get the residual nxt2.0 off? Just a thought, curious.

[rusty bumper]

Re: Trouble getting all nxt 2.0 off car?

I would say so.

If your problem is streaking, then I would wait 24 hours and see if it clears up.

[Eddie6th]

Re: Trouble getting all nxt 2.0 off car?

Maybe try UQD.

[Ganesa]

Re: Trouble getting all nxt 2.0 off car?

yup, UQD after a NXT 2.0 layer is great :]... and if you're really car crazy, add another layer of UQW on it just for the crazyness of Meguiars