
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
What to do with this?
Collapse
X
-
Re: What to do with this?
Looks like the beginning of clear coat failure and if that's the case there is no way to fix it except to repaint the panel or the entire car.
Check out this thread,
The Clearcoat Failure Photo Archive
-
Re: What to do with this?
I was hoping for a different answer, but I'll face the facts.
I recently got a 7424 XL Pad kit from Autogeek, along with M105 and M80.
The M105 on both Yellow and Orange pads didn't do anything. M80 on Orange helped a little, but didn't remove any of the oxidation.
One thing I did notice with the M105, in general, was that it dries really quick and I was having alot of trouble removing it. The M80 removes little easier but if left on more than a minute it becomes really hard to take off.
I'm going to try a different pad with the M105 with a different pad to see if I get any better results.
Comment
-
Re: What to do with this?
I did some work on the roof today.
Wetsanding lightly at 1000, then buffing with 105/orange, then 80/orange seemed to clear it up a little bit, but not all. The oxidation/clearcoat failure is deeper than I can sand through without respraying the roof.
Some Gold Class wax and it is noticeably deeper in gloss. I'm going to hit the rest of the roof in certain areas and do a full 105/80 and see how it goes.
Also, I don't have the recommended wool pad for the 105, but I have been using the LC orange, and seems to be working ok. Would there be a better option for the 105 other than Wool?
Comment
-
Re: What to do with this?
Originally posted by Maserati Mario View PostThat defiantly sounds like CC failure
Not oxidization
Nothing you do can remove it
You can only do what you did, or repaint.
Good news is they can do it cheap (employee cost) and it's a professional job too.
For right now, I'm going to wetsand and buff out what I can until I can get it to them for paint.
Comment
Comment