Announcement

**Raymond4646** · Apr 12, 2009, 04:35 PM

Re: Using SwirlX with a G100

Originally posted by opice1 View Post

What would be the suggested pad to use when using SwirlX with a G100.

Thank You

Opice1

A Yellow W-8006 should do the trick for you.

**Nappers** · Apr 12, 2009, 06:44 PM

Re: Using SwirlX with a G100

I concour, I used the yellow 8006 pad and it worked fine!

**NAMEL355** · Apr 12, 2009, 06:53 PM

Re: Using SwirlX with a G100

What speed do you guys use?

**Mike Phillips** · Apr 12, 2009, 11:00 PM

Re: Using SwirlX with a G100

Originally posted by NAMEL355 View Post

What speed do you guys use?

5.0 Speed Setting.

Read through this,

How To use: G110 - G220 - G100 - PC/Porter Cable - UDM
If you're moving up to machine polishing, be sure to read the below thread before starting...
Tips & Techniques for using the G110, G100, G220 and the PC Dual Action Polisher
(These are all similar tools)

And this,

Using the G-100 to remove swirls with the Professional Line

**opice1** · Apr 13, 2009, 05:20 PM

Re: Using SwirlX with a G100

Everyone,

Thanks for the information.
Mike, I will read those articles.

Thanks Again

opice1

Using SwirlX with a G100