Ultimate Quick Detailer Question?

[Markus Kleis]

Re: Ultimate Quick Detailer Question?

Not to hijack the thread, but can someone list the differences between the following products?

Ultimate Quick Detailer (UQD)
Last Touch from the Detailer Line
MI35 from the Mirror Glaze Line

Which one would provide you with the most bang for the buck? Would these products be acceptable by itself to maintain the finish in-between washings / waxes?

If this is already in the forum, a link would be great. I searched but came up empty.

Sure.

UQD is the consumer version of M135 (essentially), and can be bought in a spray bottle at most retail outlets. This is a product designed to remove light dust, smudges, and fingerprints...but its main strength is in adding BEAUTY and actual protection. It will add very noticeable water repulsion that is truly amazing.

M135 is similar to UQD, but you can buy it in bulk and it's marketed and distributed through different channels than consumer products. (It's in the Professional Line)

Last Touch can also also purchased in bulk, and is a very versatile product. It smells absolutely amazing, and can be used to cleaning heavier amounts of dust and contamination such as bird droppings more safely than UQD/M135.

You would use it at full strength for cleaning and QD'ing. You can also use it 50/50 diluted with distilled water as an excellent clay bar lubricant.

[Mike Phillips]

Re: Ultimate Quick Detailer Question?

Not to hijack the thread,

This would actually be better posted as a new/dedicated thread.

Somewhere on this forum I've typed up this answer a number of times, maybe a search using the word

difference


That said, nice job outlining the differences Mark.





From the bottom of the forum homepage...

If you want to start a new thread, then click to the appropriate forum by clicking here and selecting the forum that best describes what your topic will be about and then look for the button on the left hand side of the page that says, New Thread and click on it. You'll see a place to type in your Subject and below that a message box that you can type your message into. After you're finished with your message, click on the Submit New Thread button and your message will be posted to the forum.

[HK77]

Re: Ultimate Quick Detailer Question?

Sorry for Stupid Question. I really plan to buy a UQD if I have a chance but till now, I don't have an idea how to use it.

Is it just spray on and wipe off with a towel?
If so, how much amount to how large an area?
Do I need to wait after spraying?
Spray and Wipe panel by Panel or Spray whole car and then wipe off?

Sorry for stupd questions as I'm really not familiar with these products. I think I'm the only one who ask this kind of questions in this forum.

Thanks

[gb387]

Re: Ultimate Quick Detailer Question?

Sorry for Stupid Question. I really plan to buy a UQD if I have a chance but till now, I don't have an idea how to use it.

Is it just spray on and wipe off with a towel?
If so, how much amount to how large an area?
Do I need to wait after spraying?
Spray and Wipe panel by Panel or Spray whole car and then wipe off?

Sorry for stupd questions as I'm really not familiar with these products. I think I'm the only one who ask this kind of questions in this forum.

Thanks

You want to work one panel at a time out of the direct sunlight. Its best to apply and remove with a quality microfiber towel.

Ultimate Quik Detailer is simple to use, spray a light mist on the panel you are working on wipe the product in with your towel then turn the towel to a dry side and finish wiping. No need to wait after spraying, you wipe it on and wipe it off also know as Mist & Wipe. As far as the amount of product to use, you might have to play with this a little you just have to get the feel; it doesn't take all that much product. Hope that helps!